← Bill of materials
ACC-DP-89-1M5
Make rev ADrill Pipe 89 mm × 1.5 m
Short sub pipe for limited-access work
Levels
1
3 exploded lines
Material
$630
3 leaf lines
Labour
$413
4 h at $118.00
Standard cost
$1,043
Rolled up, never typed
List / margin
$1,605
35.0% at list
Multi-level explosion
Quantity per parent, quantity for one Drill Pipe 89 mm × 1.5 m, and the cost each level carries.
Make Buy Subcontract
| Lvl | Part No. | Description | Qty / parent | Qty / unit | UoM | Source | Supplier / work centre | Unit cost | Extended | Free |
|---|---|---|---|---|---|---|---|---|---|---|
| 0 | ACC-DP-89-1M5 | Drill Pipe 89 mm × 1.5 m | 1 | 1 | ea | Make | Fabrication Bay 2 | $1,043 | $1,043 | 10 |
| 1 | RAW-TUBE-114X10 | Seamless Tube 114 × 10 | 1.6 | 1.6 | m | Buy | Bohler Uddeholm Australia | $124 | $198 | 238 |
| 1 | CON-WIRE-ER70S | MIG Wire ER70S-6 1.2 mm | 1 | 1 | kg | Buy | Cigweld | $12 | $12 | 424 |
| 1 | SUB-HT-4140 | Heat Treatment - 4140, harden & temper | 1 | 1 | ea | Subcontract | Bodycote Australasia | $420 | $420 | 0 |
Where the material money goes
Bought and subcontracted content only: $210.20 bought, $420.00 outside operations.
| Part No. | Description | Supplier | Qty | Unit | Extended | Share |
|---|---|---|---|---|---|---|
| SUB-HT-4140 | Heat Treatment - 4140, harden & temper | Bodycote Australasia | 1 ea | $420 | $420 | 66.6% |
| RAW-TUBE-114X10 | Seamless Tube 114 × 10 | Bohler Uddeholm Australia | 1.6 m | $124 | $198 | 31.5% |
| CON-WIRE-ER70S | MIG Wire ER70S-6 1.2 mm | Cigweld | 1 kg | $12 | $12 | 1.9% |
Where used
Top-level item. It isn't a component of anything else.
Jobs building this
Nothing on the floor for this part right now.