← Bill of materials
ACC-DP-140-6M
Make rev BDrill Pipe 140 mm × 6 m
Seamless 140 × 12, API reg box/pin, heat treated
Levels
1
3 exploded lines
Material
$2,477
3 leaf lines
Labour
$1,003
9 h at $118.00
Standard cost
$3,480
Rolled up, never typed
List / margin
$5,435
36.0% at list
1 line in this structure are below their reorder point
RAW-TUBE-219X16 . The requirements run will tell you which of those actually have to be ordered this week.
Multi-level explosion
Quantity per parent, quantity for one Drill Pipe 140 mm × 6 m, and the cost each level carries.
Make Buy Subcontract
| Lvl | Part No. | Description | Qty / parent | Qty / unit | UoM | Source | Supplier / work centre | Unit cost | Extended | Free |
|---|---|---|---|---|---|---|---|---|---|---|
| 0 | ACC-DP-140-6M | Drill Pipe 140 mm × 6 m | 1 | 1 | ea | Make | Fabrication Bay 2 | $3,480 | $3,480 | 12 |
| 1 | RAW-TUBE-219X16 | Seamless Tube 219 × 16 | 6.2 | 6.2 | m | Buy | Bohler Uddeholm Australia | $326 | $2,021 | 12 |
| 1 | CON-WIRE-ER70S | MIG Wire ER70S-6 1.2 mm | 3 | 3 | kg | Buy | Cigweld | $12 | $35 | 424 |
| 1 | SUB-HT-4140 | Heat Treatment — 4140, harden & temper | 1 | 1 | ea | Subcontract | Bodycote Australasia | $420 | $420 | 0 |
Where the material money goes
Bought and subcontracted content only — $2,056.60 bought, $420.00 outside operations.
| Part No. | Description | Supplier | Qty | Unit | Extended | Share |
|---|---|---|---|---|---|---|
| RAW-TUBE-219X16 | Seamless Tube 219 × 16 | Bohler Uddeholm Australia | 6.2 m | $326 | $2,021 | 81.6% |
| SUB-HT-4140 | Heat Treatment — 4140, harden & temper | Bodycote Australasia | 1 ea | $420 | $420 | 17.0% |
| CON-WIRE-ER70S | MIG Wire ER70S-6 1.2 mm | Cigweld | 3 kg | $12 | $35 | 1.4% |
Where used
Top-level item — it isn't a component of anything else.